- ANOLIS ARC POWER 36 MANUAL MANUALS
- ANOLIS ARC POWER 36 MANUAL INSTALL
- ANOLIS ARC POWER 36 MANUAL SERIAL
- ANOLIS ARC POWER 36 MANUAL DRIVERS
- ANOLIS ARC POWER 36 MANUAL MANUAL
ANOLIS ARC POWER 36 MANUAL MANUAL
MANUAL CONTROL OF DMX CHANNELS.ģ.Connect the DMX output of the first fixture in a data link with the DMX input of the second fixture. ArcPower 36, 144 TECHNICAL SPECIFICATIONS: ArcPower 36 ArcPower 144 Power supply: INPUT VOLTAGE. Display: 3 digit LED, Manual control of DMX channels: via LED control panel.
The Anolis ArcPower 36 and ArcPower 144 provide versatile control via DMX. Connect first fixture to the control panel which suports DyNet protocol. Operating via DyNet protocol 1.Unplug from the mains before installation. Always connect output with the input of the next slave until all slaves are connected.Up to 32 fixtures can be connected in master/slave chain 4.Insert the termination plug (with 120 Ohm) into DMX input of the master fixture and into the DMX output of the last slave fixture in the link in order to ensure proper transmission on the data link. SAARI DUNIYA MEIN TERA HI NAAM HAI SAI BABA 23.ģ.Connect the DMX output of the master fixture in the data-chain with the DMX input of the first slave. 2.Connect the LED modules to the fixtures.
Multiple ArcPower 72/K2 installation: Connect the DMX output of the first ArcPower 72/K2 with the DMX input of the next ArcPower 72/K2.Maximum total cable length between one LED zone output of the Arcpower 72/K2 and all its connected LED modules is 40 metres. Accidental connection DMX 512 Input/Output to non-DMX 512 device (e.g.Ethernet network Hub) can damage the ArcPower 72/K2.4.2.Mounting the ArcPower 72/K2 The ArcPower 72/K2 should be be placed on a non-f lammable f lat surface in any orientation and fixed by the 4 screws.There are 4 mounting holes of diameter 5 mm in housing of the driver.Įnsure that instalation place Screws is enough ventilated.3.Description of the ArcPower 72/K2 1 - Control board 2 - Power Indicator 3 - DMX Output 4 - DMX Input 5 - LED Zone outputs 6 - RS ̃ Output 7 - Fuse Holder 8 - Power Cord DMX Input,Output.Safety instructions Every person involved with installation and maintenance of this product has to: - be qualilfied - follow the instructions of this manual CAUTION! Be careful with your operations. Unplug mains lead before opening the housing! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOU INITIAL START - UP!
ANOLIS ARC POWER 36 MANUAL SERIAL
17 9.3 Setting a serial port of PC.17 9.4 Zone commands. 14 9.Control of the ArcPower 72/K2 via RS-232.17 9.1Wiring an RS-̃ serial port.17 9. Selecting a zone.
ANOLIS ARC POWER 36 MANUAL MANUALS
See ArcPower 36/72/144/ 360 ( or ArcPower SmartWhite 36/72/144/ 360) user manuals for full details of mains power requirements and DMX operation.
ANOLIS ARC POWER 36 MANUAL INSTALL
1.Attention Do not install the module near high inflammable liquids or materials Do not allow anything to rest on the module Do not use the module near high humidity or water or expose to the rain Do not install the module near the naked flames Do not install the module in dirty,dusty or badly ventilated location 2.Installation The ArcLine Optic unit should be connected to the ArcPower driver according to the LEDs colour variants (RGB,WW,CW.).
ANOLIS ARC POWER 36 MANUAL DRIVERS
User manual ArcLine Optic 12 18 24 36 - User instructions ArcLine Optic 12, ArcLine Optic 18, ArcLine Optic 24, ArcLine Optic 36 The modules generate colored light by means of high power LEDs.The products were designed to use with the ArcPower drivers and for indoor use only. Manual or any unauthorized modification to the product. User instructions ArcLine Optic 20MC/32MC/40MC.
0 kommentar(er)
